AJAX BASELINE PIR Indoor MotionCam PhOD With HDR white

• HDR for challenging lighting conditions
• MotionCam (PhOD) Jeweller is a wireless motion detector supporting photo verification of alarms, Photo on Demand, and Photo by Scenario features. Intended for indoor installation. It can recognise movement at a distance of up to 12 meters. Ignores pets when installed and set up correctly
• MotionCam (PhOD) Jeweller works as part of the Ajax security system, communicating with the hub over two secure radio protocols: the detector uses Jeweller to transmit alarms and events and Wings to transmit photos. The hub communication range is up to 1,700 meters in an open space
• A hub is required for the detector to operate
• Lightning-fast alarms. Verified
• More than a photo. Faster than a video
• No intruder goes unnoticed
• Stable operation with pre-installed batteries
• Unique wireless technologies
• System supervision
• Sabotage resistance
• Effortless installation and setup

Communication

• 866.0–866.5 MHz
• 868.0–868.6 MHz
• 868.7–869.2 MHz
• Maximum effective radiated power (ERP) : up to 20 mW
• Radio signal modulation : GFSK
• Radio signal range : up to 1,700 m
• Encrypted communication : All stored and transmitted data are protected by block encryption featuring a dynamic key
• Frequency hopping : To prevent radio interference and jamming

•  Wings communication technology : Two-way communication / Block encryption featuring a dynamic key / Advanced anti-sabotage / Data package reload in case of transmission errors / Photo delivery check

Detection

• Motion detection distance : up to 12 m
• Motion detection angles : horizontal — 88.5°
• Motion detection speed : from 0.3 to 2.0 m/s
• Sensitivity : 3 levels
• Pet immunity : weight : up to 20 kg / height : up to 50 cm
• False alarm prevention : SmartDetect
• Temperature compensation : Effective motion detection at temperatures from −10°C to +40°C

Photo verification

• Photo by alarm : A built-in camera is activated if the detector is armed and motion is detected
• Photo resolution : 640 × 480 px / 320 × 240 px (by default) / 160 × 120 px
• HDR image : Improves the accuracy of detail in bright and dark scenes
• IR backlight : For night photography and low light conditions
• Pictures in a series : from 1 to 5 images with a resolution of 320 × 240 px or 160 × 120 px  / from 1 to 3 images with a resolution of 640 × 480 px
• Photo delivery time : up to 7 s — 160 × 120 px resolution / up to 9 s — 320 × 240 px resolution / up to 20 s — 640 × 480 px resolution

Recommendations : It is recommended to install the detector at a height of 2.4 m

Anti-sabotage protection

• Tamper alarm : Notifications on attempts to detach the device from the surface or remove it from the mounting panel
• Protection against spoofing : device authentication
• Communication loss detection : within 36 s

Power supply

• Battery : 2 × CR123A Pre-installed
• Calculated battery life : up to 4 years

Enclosure

• Dimensions : 135 × 70 × 60 mm
• Weight : 170 g
• Operating temperature range : from −10 °C to +40 °C
• Operating humidity : up to 75%
• Protection class : IP50

Specifications