WireView Pro GPU 1x12VHPWR 90°, Normal, Gauge

Thermal Grizzly’s 90° WireView Pro GPU “N” allows you to measure the power consumption of graphics cards via the 12VHPWR power connector and record this data to determine consumption. The data can be used, among other things, to determine the power costs of a graphics card or to compare the power consumption with other graphics cards. A special measurement cycle of the last 60 seconds enables a quick and convenient display of the power consumption, which is very practical for reviews, for example. At the same time, the measurement can be used to determine the power consumption of graphics cards over a certain period of time or for certain applications. In addition, peaks in power consumption that can occur when current high-end graphics cards are in operation can be detected. The Pro version has been expanded to include additional functions with plug detection, temperature sensors and the acoustic warning signal. The 90° WireView Pro GPU’s connector detection detects whether a connection cable specified for 150 watts, 300 watts, 450 watts or 600 watts is being used. It should be noted that the 90° WireView Pro GPU only measures the power consumption via the power connection cable and not any consumption via the mainboard’s PCIe slot. If the wrong cable is used or if the cable is not connected correctly, a warning tone will sound. Two temperature sensors, which are located on the circuit board at the power connections, monitor the temperatures at the power connectors. If an adjustable temperature limit is exceeded, an acoustic alarm is triggered. Two additional, included temperature sensors (10K NTC) can be connected via cable. Two sensors with a cable length of 5cm and 20cm each are included in the scope of delivery. In addition, the alarm can be triggered if the adjustable limit for the current strength (amps) is exceeded.